The Cornical and The Brite Tank

All equipment-related discussion

Moderator: Brandon

German Brewing
Posts: 367
Joined: Thu Oct 15, 2015 1:45 pm

Re: The Cornical and The Brite Tank

Postby Techbrau » Sat Jun 10, 2017 4:56 pm

Assuming 5 gallons of 1.050 wort, you can assume about 125 gallons of CO2 (or 3.78*125 = 472.5 liters) to be produced.

Assuming 2 gallons (or 3.78 * 2 = 7.56 liters) of air in the headspace and uniform mixing of the fermentation CO2 with the headspace air, by the end of fermentation we have about 7.56/(472.5 + 7.56)*100% = 1.575% of this air remaining, or about 0.12 liters.

.12 liters of air weighs about .12 * 1200 = 144 mg, 21% of which is oxygen, leaving us with .21 * 144 = 30.24 mg oxygen trapped in the keg.

5 gallons of beer is 18.92 liters, so at minimum we have 30.24 / 18.92 = 1.6 mg/l TPO coming from the fermenter headspace. This alone is 16 times higher than the recommended maximum TPO in a commercial setting (0.1 mg/l), with most breweries shooting for far below that number. While developing the LoDO process, we measured that even 0.2-0.3 mg/l oxygen picked up post-fermentation resulted in significant and rapid flavor deterioration (on the order of a couple weeks at 3 degrees C)

Is it possible that some of this headspace oxygen diffuses into the wort and is consumed by the yeast during fermentation? Yes. How much will do that, I don't know. I'm not really inclined to start using one of these things.
If you always do what you've always done, then you'll always get what you've always gotten.

Return to “Ausrüstung (Equipment)”

Who is online

Users browsing this forum: No registered users and 2 guests