Spunding valve

All equipment-related discussion

Moderator: Brandon

uberg33k
Posts: 20
Joined: Mon Apr 25, 2016 8:57 pm

Spunding valve

Postby uberg33k » Wed Apr 27, 2016 12:45 pm

I was just wondering what people here are using for a spunding setup. I know there are some resources out there for building your own, but most builds seem a bit cobbled together. I was wondering if someone around here has developed something a bit more elegant or found a product at retail they prefer.
User avatar
Ancient Abbey
German Brewing
Posts: 1187
Joined: Tue Dec 22, 2015 8:23 pm

Re: Spunding vavle

Postby Ancient Abbey » Wed Apr 27, 2016 12:52 pm

ImageUploadedByTapatalk1461775935.659785.jpg
ImageUploadedByTapatalk1461775935.659785.jpg (345.67 KiB) Viewed 1076 times


ImageUploadedByTapatalk1461775884.133735.jpg
ImageUploadedByTapatalk1461775884.133735.jpg (434.58 KiB) Viewed 1076 times
- The best do the basics better -
Bryan R
Braumeister
Posts: 882
Joined: Tue Oct 13, 2015 9:27 pm

Re: Spunding vavle

Postby Bryan R » Wed Apr 27, 2016 12:58 pm

Very similar to Ancient's
Image
caedus
Apprentice Brewer
Posts: 166
Joined: Mon Apr 25, 2016 3:27 pm

Re: Spunding vavle

Postby caedus » Wed Apr 27, 2016 1:23 pm

Where in the hell can I find the piece that attaches from the ball lock to the stainless tee? I have been trying to find one for a while now, but just have been using a 1 inch section of tubing.
Kit_B
Apprentice Brewer
Posts: 149
Joined: Tue Oct 13, 2015 8:40 pm

Re: Spunding vavle

Postby Kit_B » Wed Apr 27, 2016 1:35 pm

Here is a stainless equivalent, minus the swivel.
https://www.brewhardware.com/product_p/ffltomnpt.htm
User avatar
Bilsch
Assistant Brewer
Posts: 284
Joined: Thu Mar 10, 2016 12:35 pm

Re: Spunding vavle

Postby Bilsch » Wed Apr 27, 2016 2:12 pm

Many styles for a spundungsaparat. I arranged in this way to keep any solids or liquids that might come out, although rare chance, out of the gauge internals and hopefully less resident time in the relief check ball and spring area.
Attachments
IMG_8269.JPG
IMG_8269.JPG (21.46 KiB) Viewed 1054 times
User avatar
Brody
Assistant Brewer
Posts: 323
Joined: Sat Nov 14, 2015 11:30 pm
Location: Philadelphia, Pennsylvania

Re: Spunding vavle

Postby Brody » Wed Apr 27, 2016 3:35 pm

Ancient Abbey wrote:ImageUploadedByTapatalk1461775884.133735.jpg

ImageUploadedByTapatalk1461775935.659785.jpg


Wow, you got a walk-in lagering cave??
User avatar
Roachbrau
Apprentice Brewer
Posts: 147
Joined: Tue Oct 13, 2015 8:41 pm
Location: West Virginia
Contact:

Re: Spunding vavle

Postby Roachbrau » Wed Apr 27, 2016 3:50 pm

Mine is identical to Bryan's. I like Bilsch's idea though, I'm going to go swap the position of the guage and the keg connector on the tee now!
User avatar
Ancient Abbey
German Brewing
Posts: 1187
Joined: Tue Dec 22, 2015 8:23 pm

Re: Spunding vavle

Postby Ancient Abbey » Wed Apr 27, 2016 4:26 pm

Brody wrote:Wow, you got a walk-in lagering cave??


Yeah, I'm working on doing old school lager profiles in there. After primary and secondary, they go into a chest freezer to deep lager.
- The best do the basics better -

Who is online

Users browsing this forum: No registered users and 1 guest