Can I get some ideas about how to convert my system from BIAB
Moderator: Brandon
-
- German Brewing
- Posts: 409
- Joined: Thu Oct 15, 2015 1:45 pm
Re: Can I get some ideas about how to convert my system from BIAB
If you always do what you've always done, then you'll always get what you've always gotten.
-
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
Re: Can I get some ideas about how to convert my system from BIAB
A standard racking into a keg, that was standardly purged will get you .8-1ppm. That will fade your it to nothing in a week or so.
-German Brewing Founder-
- mpietropaoli
- Posts: 91
- Joined: Tue Apr 19, 2016 2:00 pm
Re: Can I get some ideas about how to convert my system from BIAB
Well of course, O2 is more soluble at cold temps (and you guys stress it in your paper), but he is talking about his BIAB system, which relates primarily to hot-side. I'm assuming he will implement your cold-side processes.
The 0.6-0.8 ppm, is that from a typical rack with a siphon or other open gravity feed?
We racked ours last night into 3 kegs, and doing a proper purge and closed rack as you guys have recommended was frankly easier than the way we used to do it!
The 0.6-0.8 ppm, is that from a typical rack with a siphon or other open gravity feed?
We racked ours last night into 3 kegs, and doing a proper purge and closed rack as you guys have recommended was frankly easier than the way we used to do it!
There's no easy way out. There's no shortcut home.
- Brandon
- German Brewing
- Posts: 553
- Joined: Tue Oct 13, 2015 8:38 pm
- Location: Pennsylvania, USA
- Contact:
Re: Can I get some ideas about how to convert my system from BIAB
Visit our home at: and join us on Facebook at
-
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
Re: Can I get some ideas about how to convert my system from BIAB
-German Brewing Founder-
Who is online
Users browsing this forum: No registered users and 44 guests