SOP for calibration and use of DO meters
Moderator: Brandon
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
SOP for calibration and use of DO meters
Hey there. Just got my DO meter in the mail, and am now playing with it. I figured I would run some questions by you guys and see how you guys use and calibrate them.
I have heard of two ways to make a zero-oxygen solution:
1. Bakers yeast and water
2. 5% SMB solution
Both are cheap (compared to a $20 bottle of Zero solution) and easy to produce, but I wanted to see what you guys were doing to calibrate.
I know user mchrispen mentioned using stainless steel cups to pull and quickly cool samples, but I was curious as to what Bryan and the others with DO meters were doing to cool samples prior to taking a reading.
I would like to make a quick Standard Operating Procedure for taking such readings, and keep them posted for the future to ensure accuracy and that everyone is on the right page when it comes to measurement.
I have heard of two ways to make a zero-oxygen solution:
1. Bakers yeast and water
2. 5% SMB solution
Both are cheap (compared to a $20 bottle of Zero solution) and easy to produce, but I wanted to see what you guys were doing to calibrate.
I know user mchrispen mentioned using stainless steel cups to pull and quickly cool samples, but I was curious as to what Bryan and the others with DO meters were doing to cool samples prior to taking a reading.
I would like to make a quick Standard Operating Procedure for taking such readings, and keep them posted for the future to ensure accuracy and that everyone is on the right page when it comes to measurement.
- mchrispen
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 2:15 pm
- Location: Austin, TX
- Contact:
Re: SOP for calibration and use of DO meters
The SMB would at least prevent any organic solids from fouling the meter... just saying.
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: SOP for calibration and use of DO meters
I definitely prefer the SMB, however most of the guides I am seeing call for Cobalt chloride to quicken the interaction between sulfite and oxygen, and I don't have nay of that laying around.
I am running a test now of 5% by weight SMB solution and seeing how it turns out.
I am running a test now of 5% by weight SMB solution and seeing how it turns out.
- mchrispen
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 2:15 pm
- Location: Austin, TX
- Contact:
Re: SOP for calibration and use of DO meters
Also - remember that the solution in the meter consumes O2 as well... so don't leave it for an extended time beyond stability.
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: SOP for calibration and use of DO meters
You will be surprised how well yeast works for ripping the oxygen out of solution.
-
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
Re: SOP for calibration and use of DO meters
Tech, and Brandon have both done the zero cal, while I did not. Our readings were * I think* within .1 of each other.
I always turn mine on, leave the cap on and let it sit until it shuts off. ( you should see a little blinking icon on the bottom right of the screen now).
I then turn it on again, and allow the reading to stabilize.
I then hit cal, and you will see 101.7, let it self cal.
Then grab your sample and make sure there are no bubbles on the membrane.
Get your reading.
I always turn mine on, leave the cap on and let it sit until it shuts off. ( you should see a little blinking icon on the bottom right of the screen now).
I then turn it on again, and allow the reading to stabilize.
I then hit cal, and you will see 101.7, let it self cal.
Then grab your sample and make sure there are no bubbles on the membrane.
Get your reading.
-German Brewing Founder-
-
- German Brewing
- Posts: 409
- Joined: Thu Oct 15, 2015 1:45 pm
Re: SOP for calibration and use of DO meters
I tried taking measurements of finished beer that had a DO content of approximately 0.4 with and without zero calibrating my meter. I got the same reading.
If you always do what you've always done, then you'll always get what you've always gotten.
Who is online
Users browsing this forum: No registered users and 39 guests