DIY Mash Caps

All equipment-related discussion

Moderator: Brandon

User avatar
Brandon
German Brewing
Posts: 554
Joined: Tue Oct 13, 2015 8:38 pm
Location: Pennsylvania, USA
Contact:

Re: DIY Mash Caps

Postby Brandon » Thu Jun 02, 2016 9:57 pm

Visit our home at: and join us on Facebook at
User avatar
Bilsch
Assistant Brewer
Posts: 284
Joined: Thu Mar 10, 2016 12:35 pm

Re: DIY Mash Caps

Postby Bilsch » Thu Jun 02, 2016 10:07 pm

I think your probably out of luck at kettle ID of 17.5" The lid would have to be a listed size of 17 to 17.25" and they jump right over that range. The closest one would be the 15.75" one and after you bent the lip up some to get the draft height you'd be at about 16" OD on the outer enge with 1.5" gap to your pot wall. Maybe better then nothing but not a greasy fit either. Sorry.
User avatar
Brandon
German Brewing
Posts: 554
Joined: Tue Oct 13, 2015 8:38 pm
Location: Pennsylvania, USA
Contact:

Re: DIY Mash Caps

Postby Brandon » Thu Jun 02, 2016 10:07 pm

Visit our home at: and join us on Facebook at
User avatar
bensonledbetter
Posts: 46
Joined: Fri Apr 29, 2016 10:15 am
Location: Houston, TX

Re: DIY Mash Caps

Postby bensonledbetter » Fri Jun 03, 2016 7:11 am

I finally ended up going with a stainless steel 14" x 2" cake pan for my kettle with a diameter of 15 3/8". I'm going to install a bulkhead in it for the wort return.

It's not the perfect fit, but leaves less than 3/4" all around exposed. Hoping that's good enough. Also having a variable wort return should make brewing anything from 5 to 10 gallon batches a cinch.
User avatar
narcout
Posts: 35
Joined: Mon Apr 25, 2016 3:13 pm
Location: Los Angeles

Re: RE: Re: DIY Mash Caps

Postby narcout » Tue Jun 28, 2016 3:24 pm

bjanat
Apprentice Brewer
Posts: 145
Joined: Mon Apr 25, 2016 7:28 pm

Re: DIY Mash Caps

Postby bjanat » Wed Jul 06, 2016 5:30 am

Scratching my head thinking what could be done with a speidel BM. Don't think the mobdee thread about his modification included anything about a lower mash cap.


Sent from my iPhone using Tapatalk
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: DIY Mash Caps

Postby wobdee » Wed Jul 06, 2016 7:25 am

User avatar
Nick_D
Apprentice Brewer
Posts: 115
Joined: Sun Jul 03, 2016 10:58 am

Re: DIY Mash Caps

Postby Nick_D » Thu Jul 21, 2016 2:26 am

I imagine this idea will be met with horror, but for the super cheap ghetto mash cap, how about plain styrofoam? no foil. Just styrofoam to float on top. In a basic cooler style mash tun, this would be better than nothing surely? I doubt the foam would leach any off flavours at those temps. Ok, now flame me :D
User avatar
ajk
Posts: 97
Joined: Mon Apr 25, 2016 5:40 pm

Re: DIY Mash Caps

Postby ajk » Thu Jul 21, 2016 6:28 am

¯\_(ツ)_/¯ That's what I use, wrapped in foil tape. Here it is, retrofitted with Loc-Line.
User avatar
Big Monk
Assistant Brewer
Posts: 282
Joined: Mon Jun 06, 2016 7:29 am
Location: New York

Re: DIY Mash Caps

Postby Big Monk » Thu Jul 21, 2016 7:34 am

Nice!
“We are what we repeatedly do. Excellence, therefore, is not an act, but a habit.” Aristotle

"Messieurs, c’est les microbes qui auront le dernier mot." Louis Pasteur

Check us out at www.lowoxygenbrewing.com

Who is online

Users browsing this forum: No registered users and 1 guest