Page 9 of 12
Re: DIY Mash Caps
Posted: Thu Jul 21, 2016 5:57 pm
by storunner13
Re: DIY Mash Caps
Posted: Thu Jul 21, 2016 7:58 pm
by Brandon
Re: DIY Mash Caps
Posted: Thu Jul 21, 2016 8:17 pm
by ajk
Yes, all ½" NPT. For a variety of reasons I used spare parts instead of a real bulkhead fitting. Here's the exploded view:
I believe the circle flow kit I bought didn't come with the elbow, the NPT adapter, or the NPT coupling (blue), so I ordered those separately.
Re: DIY Mash Caps
Posted: Fri Jul 22, 2016 10:43 am
by storunner13
Thanks. This is what I was expecting, but the photo helps me visualize it. Is the elbow necessary? Or can you get enough angular adjustment with the Loc-Line flow kit? I'm building my mash cap next week.
Re: DIY Mash Caps
Posted: Fri Jul 22, 2016 12:28 pm
by ajk
Re: DIY Mash Caps
Posted: Fri Nov 25, 2016 4:46 pm
by Natebriscoe
My latest mash cap.
Re: DIY Mash Caps
Posted: Sat Nov 26, 2016 12:32 am
by caedus
How did you connect the silicon tube together? Just a double hose barb and clamps?
Re: RE: Re: DIY Mash Caps
Posted: Sat Nov 26, 2016 9:14 am
by Natebriscoe
Re: DIY Mash Caps
Posted: Sat Nov 26, 2016 7:20 pm
by Weizenberg
These are professional stainless lids for fermentation tanks of variable capacity.
http://www.wagnerinox.at/Schwimmdeckel- ... komplett_1there is a bug in the english localisation, so switch to German if you want to see the drop down menu of available sizes. If you are outside the EU zone, then there is probably a manufacturer in your region providing a similar product.
hope this inspires.
Re: RE: Re: DIY Mash Caps
Posted: Sat Nov 26, 2016 10:07 pm
by Natebriscoe