Wet Milling Equipment and settings
Moderator: Brandon
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Wet Milling Equipment and settings
Nate.. how did you get the gear driven second roller there? Mine definitely did not come with that feature nor can find this as an option on MBH site.
-
- Assistant Brewer
- Posts: 264
- Joined: Mon Apr 25, 2016 10:57 pm
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Wet Milling Equipment and settings
Very cool !!
Did you have to change the bushing as well? What gap did you choose and how did you figure the gear diameter for the correct backlash? Care to share the suppliers and part numbers?
Thanks.
Did you have to change the bushing as well? What gap did you choose and how did you figure the gear diameter for the correct backlash? Care to share the suppliers and part numbers?
Thanks.
-
- Assistant Brewer
- Posts: 264
- Joined: Mon Apr 25, 2016 10:57 pm
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Wet Milling Equipment and settings
Can't wait to read the project write up.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Wet Milling Equipment and settings
Outstanding! Please post ASAP.
Yes, my drill begged for mercy once I started malt conditioning, especially with wheat.
Yes, my drill begged for mercy once I started malt conditioning, especially with wheat.
- The best do the basics better -
-
- Assistant Brewer
- Posts: 264
- Joined: Mon Apr 25, 2016 10:57 pm
Re: Wet Milling Equipment and settings
1/2 hp motor (usa made) http://www.surpluscenter.com/Electrical ... 0-2704.axd
Gear Reducer 10:1
http://www.surpluscenter.com/Power-Tran ... -R-56C.axd
Reducer base
http://www.surpluscenter.com/Power-Tran ... 3-BASE.axd
Sent from my SM-G930V using Tapatalk
Gear Reducer 10:1
http://www.surpluscenter.com/Power-Tran ... -R-56C.axd
Reducer base
http://www.surpluscenter.com/Power-Tran ... 3-BASE.axd
Sent from my SM-G930V using Tapatalk
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Wet Milling Equipment and settings
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
-
- Assistant Brewer
- Posts: 264
- Joined: Mon Apr 25, 2016 10:57 pm
Re: Wet Milling Equipment and settings
Coupler parts (for my setup, yours may vary)
http://www.surpluscenter.com/Power-Tran ... 3420-X.axd
http://www.surpluscenter.com/Power-Tran ... -G-156.axd
http://www.surpluscenter.com/Power-Tran ... 3420-E.axd
Sent from my SM-G930V using Tapatalk
http://www.surpluscenter.com/Power-Tran ... 3420-X.axd
http://www.surpluscenter.com/Power-Tran ... -G-156.axd
http://www.surpluscenter.com/Power-Tran ... 3420-E.axd
Sent from my SM-G930V using Tapatalk
-
- Assistant Brewer
- Posts: 264
- Joined: Mon Apr 25, 2016 10:57 pm
Re: Wet Milling Equipment and settings
I have a friend using this motor as well
https://www.allamericanaleworks.com/sho ... s-package/
Sent from my SM-G930V using Tapatalk
https://www.allamericanaleworks.com/sho ... s-package/
Sent from my SM-G930V using Tapatalk
Who is online
Users browsing this forum: No registered users and 2 guests