Single Vessel LODO Planning
Moderator: Brandon
-
- German Brewing
- Posts: 409
- Joined: Thu Oct 15, 2015 1:45 pm
Re: Single Vessel LODO Planning
Several people who have tried it both ways (preboil vs yeast) have anecdotally reported that the yeast method imparts a slightly "dirty" taste to the wort with a little less fresh malt flavor. Try it both ways and see what you like.
If you always do what you've always done, then you'll always get what you've always gotten.
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Single Vessel LODO Planning
I take this info from good advice. Unfortunately I cannot explain because it's beyond my competence. Ancient Abbey might, but that's not my area of expertise.
If you dig in the German hobbybrauer forums (the old, yellow one), there were some pros explaining exactly why dead yeast in the mash isn't a good idea. So I just heed that advice. Adding spent yeast to the mash was discussed there once, believe it or not.
Of course, nothing will stop you from doing this. After all it's your drink and you are the main consumer. So put into it whatever you like.
For my part, I am happy to heed the advice of people who most certainly know better.
(PS: IIRC it has something to do with lipids in the mash)
If you dig in the German hobbybrauer forums (the old, yellow one), there were some pros explaining exactly why dead yeast in the mash isn't a good idea. So I just heed that advice. Adding spent yeast to the mash was discussed there once, believe it or not.
Of course, nothing will stop you from doing this. After all it's your drink and you are the main consumer. So put into it whatever you like.
For my part, I am happy to heed the advice of people who most certainly know better.
(PS: IIRC it has something to do with lipids in the mash)
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Single Vessel LODO Planning
I don't mean to press, Weizen. I am very curious about the science and the do's and don'ts of lodo.
I am just planning on applying these methods to a 10-15 bbl brewing system in the next 1-2 years. Pre-Boiling just doesn't seem to be like a reasonable cost (cost of fuel to heat up and boil for a few minutes, then cool). I am still open to the idea, but I just think that yeast scavenging seems to be a good solution for a system too large to pre-boil and too small to have an oxygen scrubbing water system.
I am just planning on applying these methods to a 10-15 bbl brewing system in the next 1-2 years. Pre-Boiling just doesn't seem to be like a reasonable cost (cost of fuel to heat up and boil for a few minutes, then cool). I am still open to the idea, but I just think that yeast scavenging seems to be a good solution for a system too large to pre-boil and too small to have an oxygen scrubbing water system.
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Single Vessel LODO Planning
For that size it's probably best to consider a proper water treatment plant in the first place. Degassing water is a de-facto standard in the ink and petro-chemical industry, so there are solutions about world-wide. You'll probably settle for a packet column or a membrane contactor (I'd opt for the latter).
I really wouldn't recommend degassing water with yeast. If that would be such a good (and cheap) idea, then all breweries would do that. Alas, none do. So that's something to consider. You might be able to filter the yeast out, but that could introduce more oxygen in return.
Nowadays I'd most likely opt for a membrane contactor. Looks like you have Kunze's book. There is a nice illustration in there
I really wouldn't recommend degassing water with yeast. If that would be such a good (and cheap) idea, then all breweries would do that. Alas, none do. So that's something to consider. You might be able to filter the yeast out, but that could introduce more oxygen in return.
Nowadays I'd most likely opt for a membrane contactor. Looks like you have Kunze's book. There is a nice illustration in there
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
-
- Apprentice Brewer
- Posts: 145
- Joined: Mon Apr 25, 2016 7:28 pm
Re: Single Vessel LODO Planning
I wonder what this would cost http://www.alfalaval.com/globalassets/d ... weries.pdf
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Single Vessel LODO Planning
It looks like a fancy CIP ball that can handle CO2/Water mixtures.
Cool video here: http://www.alfalaval.com/rotaryjetmixer
I am curious if you could do something like that just at home.
Cool video here: http://www.alfalaval.com/rotaryjetmixer
I am curious if you could do something like that just at home.
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Single Vessel LODO Planning
Thats assuming that all the breweries already thought of the yeast DO method and dismissed it. Seems some are wary of the method and I get that but The words "try it, see for yourself" apply here also.
Last edited by Bilsch on Thu Dec 08, 2016 6:31 pm, edited 1 time in total.
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Single Vessel LODO Planning
I am actually really interested in the whirlpool thing that bjanat posted. I have a pump manifold, so it should be easy enough to tack on a Carb stone on the whirlpool intlet. When heating strike water you could recirc it through the pump> carb stone port> cip ball or sprayer. Easy and cheap solution. We all have CO2 that is cheap enough.
I am going to play with it and see if I can get any results
I am going to play with it and see if I can get any results
- Brody
- Assistant Brewer
- Posts: 326
- Joined: Sat Nov 14, 2015 11:30 pm
- Location: Philadelphia, Pennsylvania
Re: Single Vessel LODO Planning
I've been doing the yeast/sugar and pre-boil interchangeably lately haven't noticed a difference personally.
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Single Vessel LODO Planning
I use both boil and yeast myself alternately and do not see a difference either but the jury is still out until many more tests are done. It may well turn out that boiling is better but until testing is done to say one way or the other, I think dismissing it without having tried it might be doing a disservice to fellow brewers.
Who is online
Users browsing this forum: No registered users and 60 guests