Speidel Braumeister

All equipment-related discussion

Moderator: Brandon

Kit_B
Apprentice Brewer
Posts: 149
Joined: Tue Oct 13, 2015 8:40 pm

Re: Speidel Braumeister

Postby Kit_B » Tue Nov 10, 2015 5:18 am

When you remove the spent grain, is there a different amount of sludge than you're used to, on top?
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Nov 10, 2015 9:38 am

Kit_B
Apprentice Brewer
Posts: 149
Joined: Tue Oct 13, 2015 8:40 pm

Re: Speidel Braumeister

Postby Kit_B » Tue Nov 10, 2015 9:59 am

wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Nov 10, 2015 6:33 pm

wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Dec 22, 2015 7:02 pm

After a few brews with this system I decided to modify the malt pipe so I could cut down the amount of mash water and boil less than 2 hours.

I drilled 8 ea 1/2" holes 3 1/2" down from the top. It works but the waterfall effect makes it very noisy, too much splashing. Fixed that with a piece of tubing wrapped around just under the holes. Nice and quiet now.
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Dec 22, 2015 7:06 pm

IMG_20151222_113915327.jpg
IMG_20151222_113915327.jpg (3.15 MiB) Viewed 1589 times
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Dec 22, 2015 7:11 pm

1450829428734-551665768.jpg
1450829428734-551665768.jpg (3.15 MiB) Viewed 1587 times
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Dec 29, 2015 11:27 am

Drilled 8 more holes for better flow and less splashing. Then I was thinking of incorporating a paint strainer bag to catch any loose grains that sneak by the screens and get sucked into the pump. Did a little test with some old mystery malt I had and at first I tried the bag without the fine mesh screens. I cut a small slit in the bottom of the bag, placed it over the center rod followed by the lower false bottom plate. Then I added the grain followed by the top plate. At first it looked like it would work but after about 10 min too much grains were getting by that top plate without the fine screen and the bag started to clog around the malt pipe holes impeeding the flow. I shut her down, pulled the malt pipe, removed the bag and started over with the fine mesh screens. No problems encountered running it this way so I'll stick to this method for future brews.

All in all I'm pretty pleased as this will allow me to brew 3 gal batches without having to boil 2 hours to reduce the wort to the volume I need. I'll also mash with less water and not have to worry about exposing the heating elements.
IMG_20151228_131534.jpg
IMG_20151228_131534.jpg (431.72 KiB) Viewed 1581 times

IMG_20151228_131534.jpg
IMG_20151228_131534.jpg (431.72 KiB) Viewed 1581 times
Attachments
IMG_20151228_140058.jpg
IMG_20151228_140058.jpg (394.22 KiB) Viewed 1581 times
wobdee
Assistant Brewer
Posts: 331
Joined: Thu Oct 15, 2015 5:25 pm
Location: Western WIS

Re: Speidel Braumeister

Postby wobdee » Tue Dec 29, 2015 11:33 am

I could of just bought the short malt pipe for the 20l BM but what's the fun in that when I can drill holes and modify what I got. Besides I think the short malt pipe may be a bit too small from what I've researched and I'll be able to mash a little more grains in mine.
Bryan R
Braumeister
Posts: 882
Joined: Tue Oct 13, 2015 9:27 pm

Re: Speidel Braumeister

Postby Bryan R » Tue Dec 29, 2015 11:38 am

Nice work Todd!




-German Brewing Founder- :tu

Who is online

Users browsing this forum: Bing [Bot] and 2 guests