Boil length and FWH, Lauter period

Times, hopping methods, etc

Moderator: Brandon

User avatar
mchrispen
Apprentice Brewer
Posts: 163
Joined: Mon Apr 25, 2016 2:15 pm
Location: Austin, TX
Contact:

Re: Boil length and FWH, Lauter period

Postby mchrispen » Wed Apr 27, 2016 9:12 am

I have the Extech meter. Right now just documenting carefully each test location. Which is why I am rethinking the liquor boil conundrum... moving liquor from the BK to the HLT will be helpful isolating my pump/chiller cold side without risking a beer through it first.

So big matrixes over several brew days should give me good data to analyze my gear, procedure and locate any trouble areas. Cold side will be my weakest link as I have heavily modified the Chill Wizard.
User avatar
Ancient Abbey
German Brewing
Posts: 1164
Joined: Tue Dec 22, 2015 8:23 pm

Re: Boil length and FWH, Lauter period

Postby Ancient Abbey » Wed Apr 27, 2016 9:31 am

It is good to know where the leaks are before you start using SMB. Since you already have a meter, checking where your infusion points are before you do a batch with SMB is the smart way to go. Once you start using SMB, you won't notice it scavenging the DO with your meter; however, if you haven't fixed the leaks you'll create more sulfate than you want. This can be remedied by the yeast later, but it's best to get a nice, tight system.
- The best do the basics better -

Who is online

Users browsing this forum: No registered users and 1 guest