Spunding valve
Moderator: Brandon
-
- Posts: 20
- Joined: Mon Apr 25, 2016 8:57 pm
Spunding valve
I was just wondering what people here are using for a spunding setup. I know there are some resources out there for building your own, but most builds seem a bit cobbled together. I was wondering if someone around here has developed something a bit more elegant or found a product at retail they prefer.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Spunding vavle
- ImageUploadedByTapatalk1461775935.659785.jpg (345.67 KiB) Viewed 10058 times
- ImageUploadedByTapatalk1461775884.133735.jpg (434.58 KiB) Viewed 10058 times
- The best do the basics better -
-
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Spunding vavle
Where in the hell can I find the piece that attaches from the ball lock to the stainless tee? I have been trying to find one for a while now, but just have been using a 1 inch section of tubing.
-
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
-
- Apprentice Brewer
- Posts: 149
- Joined: Tue Oct 13, 2015 8:40 pm
Re: Spunding vavle
Here is a stainless equivalent, minus the swivel.
https://www.brewhardware.com/product_p/ffltomnpt.htm
https://www.brewhardware.com/product_p/ffltomnpt.htm
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Spunding vavle
Many styles for a spundungsaparat. I arranged in this way to keep any solids or liquids that might come out, although rare chance, out of the gauge internals and hopefully less resident time in the relief check ball and spring area.
- Attachments
-
- IMG_8269.JPG (21.46 KiB) Viewed 10036 times
- Brody
- Assistant Brewer
- Posts: 326
- Joined: Sat Nov 14, 2015 11:30 pm
- Location: Philadelphia, Pennsylvania
- Roachbrau
- Apprentice Brewer
- Posts: 147
- Joined: Tue Oct 13, 2015 8:41 pm
- Location: West Virginia
- Contact:
Re: Spunding vavle
Mine is identical to Bryan's. I like Bilsch's idea though, I'm going to go swap the position of the guage and the keg connector on the tee now!
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Spunding vavle
- The best do the basics better -
Who is online
Users browsing this forum: No registered users and 4 guests