Suggestion for purging corny kegs
Moderator: Brandon
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Suggestion for purging corny kegs
That's right.
Note that i don't use them for primary. For primary I would use one with a shortened spear to avoid having to push out the yeast before transfer.
Since I only use them for secondary, the fact that the yeast.does come out works to my advantage to avoid the dangers of autolysis.
I may change my mind, but for the time being that's what I'm experimenting with.
The ideal lager vessel would be one which is horizontal (easier on the yeast) and with a dump valve to discard old yeast.
When you look into the Lagerraum at many German breweries, that's what you will find.
Note that i don't use them for primary. For primary I would use one with a shortened spear to avoid having to push out the yeast before transfer.
Since I only use them for secondary, the fact that the yeast.does come out works to my advantage to avoid the dangers of autolysis.
I may change my mind, but for the time being that's what I'm experimenting with.
The ideal lager vessel would be one which is horizontal (easier on the yeast) and with a dump valve to discard old yeast.
When you look into the Lagerraum at many German breweries, that's what you will find.
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Suggestion for purging corny kegs
After witnessing Star San being used for acid washing Sacc, I am convinced that it's only useful at killing bacteria. I purge all kegs with boiling water now, filled to the rim with flush cut gas tubes and full length liquid tubes. Heat is the simple solution for pasteurizing and eliminating O2.
- The best do the basics better -
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Suggestion for purging corny kegs
Totally agree about not trusting starsan that's why I use the kettle and take my purging solution above 85c. Would really love to be able to purge with steam like AJ DeLagne outlined on another forum but it's just not possible at the moment.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Suggestion for purging corny kegs
What was his method?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- The best do the basics better -
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Suggestion for purging corny kegs
He has a boiler that heats his house with a culinary steam filter attached so he can blast out his kegs with authority.
Last edited by Bilsch on Fri Apr 07, 2017 2:54 pm, edited 1 time in total.
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Suggestion for purging corny kegs
How did he justify the expense to his Mrs?
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
- Bilsch
- Assistant Brewer
- Posts: 283
- Joined: Thu Mar 10, 2016 12:35 pm
Re: Suggestion for purging corny kegs
I got the impression the boiler was part of his house heating system and the only additional piece was the steam filter. No idea what those cost but I imagine having a source of steam in the home brewery would be handy for many things. I'm jealous.
-
- Apprentice Brewer
- Posts: 112
- Joined: Fri Feb 24, 2017 2:49 pm
Re: Suggestion for purging corny kegs
[quote="Weizenberg"]I am using 20l kegs with A-Type spears.
When going into secondary it is not necessary to purge the vessel since the remaining fermentables and active yeast act as sufficient anti-oxidant.
/quote]
Do you mean that you can do an "open loop" into secondary? In my mind cold beer picks up oxygen very fast (very fast), and when the beer is cold the yeast is not that active, so my take on this is that the yeast can not consume the o2 fast enough.
If your point is correct then it should not be an issue with regular bottle-filling with added extract for carbonation, since the yeast would scavenge the o2 from the headspace?
When going into secondary it is not necessary to purge the vessel since the remaining fermentables and active yeast act as sufficient anti-oxidant.
/quote]
Do you mean that you can do an "open loop" into secondary? In my mind cold beer picks up oxygen very fast (very fast), and when the beer is cold the yeast is not that active, so my take on this is that the yeast can not consume the o2 fast enough.
If your point is correct then it should not be an issue with regular bottle-filling with added extract for carbonation, since the yeast would scavenge the o2 from the headspace?
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Suggestion for purging corny kegs
I never do closed loop transfers.
If you want to know definitely, then try 2 methods several times and compare the results. Measuring is also a good idea.
It may save you a raft of unnecessary work (PS: I don't use mash caps either)
If you want to know definitely, then try 2 methods several times and compare the results. Measuring is also a good idea.
It may save you a raft of unnecessary work (PS: I don't use mash caps either)
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
Who is online
Users browsing this forum: No registered users and 61 guests