Issues with the process
Moderator: Brandon
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Issues with the process
I believe it is H2S, because it definitely doesn't smell of sulfites. It has that raunchy egg aroma.
I also cut my SO4 level down to whatever the sulfite gives me (~30ppm?), because I found some sources saying excess levels could lead to more H2S being formed.
I also cut my SO4 level down to whatever the sulfite gives me (~30ppm?), because I found some sources saying excess levels could lead to more H2S being formed.
- lupulus
- Apprentice Brewer
- Posts: 206
- Joined: Wed May 11, 2016 8:35 pm
Re: Issues with the process
Ich trinke Bier nur an Tagen die mit G enden , und Mittwochs
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Issues with the process
Fair points, but in the past I have been pitching ~100B cells per gallon, which is around 3m cells/ml/plato. I also oxygenate to 8-10 ppm oxygen immediately after pitch.
I am going to try Techbrau's pitching rate and see how that works out, I have a wort that is currently cold crashing in the conical @7C, going to pitch when I get home. Tried a few different things this time, hopefully all goes well.
I am going to try Techbrau's pitching rate and see how that works out, I have a wort that is currently cold crashing in the conical @7C, going to pitch when I get home. Tried a few different things this time, hopefully all goes well.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Issues with the process
- The best do the basics better -
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: Issues with the process
- Attachments
-
- Annemuller.jpg (299.94 KiB) Viewed 8882 times
- The best do the basics better -
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Issues with the process
I ferment in ZKVs
That gives me the opportunity to dump the yeast twice before transfer (0.5-0.8% from Vsend)
Pitch at 5C, main temp 8-9C, transfer at 3C (lager cellar temp).
My cell count is 20-25 * 10^6 cells perl ml
O2 is at 6-9mgl
Yeast is currently directly from Weihenstephan. W43/70, W109 or W105
FYI i am currently testing new fermentation equipment. A bit too early to talk about results, but the B&K is a dream to work with.
That gives me the opportunity to dump the yeast twice before transfer (0.5-0.8% from Vsend)
Pitch at 5C, main temp 8-9C, transfer at 3C (lager cellar temp).
My cell count is 20-25 * 10^6 cells perl ml
O2 is at 6-9mgl
Yeast is currently directly from Weihenstephan. W43/70, W109 or W105
FYI i am currently testing new fermentation equipment. A bit too early to talk about results, but the B&K is a dream to work with.
- IMG_20170421_094950.jpg (3.13 MiB) Viewed 8875 times
- IMG_20170421_095110.jpg (3.32 MiB) Viewed 8875 times
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
- Big Monk
- Assistant Brewer
- Posts: 282
- Joined: Mon Jun 06, 2016 7:29 am
- Location: New York
Re: Issues with the process
“We are what we repeatedly do. Excellence, therefore, is not an act, but a habit.” Aristotle
"Messieurs, c’est les microbes qui auront le dernier mot." Louis Pasteur
Check us out at www.lowoxygenbrewing.com
"Messieurs, c’est les microbes qui auront le dernier mot." Louis Pasteur
Check us out at www.lowoxygenbrewing.com
-
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Issues with the process
I will have to find them again, but the gist of it was that the metabolism of sulfate produces SO2 and H2S, so reducing sulfate reduced the the sulfur compounds. I found some cool tests used in the wine industry for measuring sulfide production, along with sulfide test strips. However, the strips aren't nearly accurate enough for testing.
@Weizen - how much dead space is in the keg? Do you modify the shanks at all, or just use it normally and push yeast and trub out via the beer out?
@Weizen - how much dead space is in the keg? Do you modify the shanks at all, or just use it normally and push yeast and trub out via the beer out?
- Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Issues with the process
No dead-space. They are perfect. You can easily fill them 100% without issue.
http://www.schaefer-container-systems.c ... steel-keg/
PS: They have a US distributor. Mine come in a 20l size which is a drop-in replacement for the corny's.
At the moment I just push the yeast out. Takes a few go's. I figured it's much better to get the beer of the yeast eventually. So it's either filter, umdruecken or, just flush it out but that requires a full length tube.
I haven't decided yet what's best for me.
http://www.schaefer-container-systems.c ... steel-keg/
PS: They have a US distributor. Mine come in a 20l size which is a drop-in replacement for the corny's.
At the moment I just push the yeast out. Takes a few go's. I figured it's much better to get the beer of the yeast eventually. So it's either filter, umdruecken or, just flush it out but that requires a full length tube.
I haven't decided yet what's best for me.
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
- Cavpilot2000
- Posts: 73
- Joined: Wed Mar 29, 2017 10:00 am
Re: Issues with the process
I know it kinda violates pure low O2 principle, but I need my Pils to be presentation-ready before natural process will allow, so the other day I did two things to get me there.
One, I replaced the stock dip tube with a cut one. I did it with gas going into the keg but with the PRV open (I tried it once with the PRV closed and was rewarded with a beer fountain). It may have introduced a small amount of O2,but I think if a slight overpressure condition is enough to keep chemical agents out of Abramstanks, it's good enough to keep outside air out of my keg.
Anyway, after that, and still with gas flowing, I opened the lid and added a gelatin clarifying dose (using preboiled water for the gelatin solution and very gently lowering the measuring cup into the beer so as to not "pour" it through free air).
Then I cold crashed it.
I'll see tonight (48 hours later) what effect this two-pronged approach had.
One, I replaced the stock dip tube with a cut one. I did it with gas going into the keg but with the PRV open (I tried it once with the PRV closed and was rewarded with a beer fountain). It may have introduced a small amount of O2,but I think if a slight overpressure condition is enough to keep chemical agents out of Abramstanks, it's good enough to keep outside air out of my keg.
Anyway, after that, and still with gas flowing, I opened the lid and added a gelatin clarifying dose (using preboiled water for the gelatin solution and very gently lowering the measuring cup into the beer so as to not "pour" it through free air).
Then I cold crashed it.
I'll see tonight (48 hours later) what effect this two-pronged approach had.
Who is online
Users browsing this forum: No registered users and 3 guests