SMB AT Kegging
Moderator: Brandon
-
- Assistant Brewer
- Posts: 331
- Joined: Thu Oct 15, 2015 5:25 pm
- Location: Western WIS
SMB AT Kegging
Was thinking about this lately. Say you transfer from your fermenter when beer is finished to keg with a 6-10mg/l dose of smb. The smb should help some by scrubbing O2 but doesn't it also kill any yeast that was transfered over as well? Could that dead yeast lead to off flavors?
Also was thinking of other options besides timing the fermentation for Spunding. What about transferring after complete fermentation and adding gyle or speise, anyone try that? I could see where life could get in the way at times you need to transfer.
Also was thinking of other options besides timing the fermentation for Spunding. What about transferring after complete fermentation and adding gyle or speise, anyone try that? I could see where life could get in the way at times you need to transfer.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: SMB AT Kegging
My bottle says to use at 2 oz per 1/2 gal to sanitize, so I'm not too worried about 6-10 mg/l.
Krausen would work fine. I just did it with my dopplebock as some insurance to ensure I reach EVG.
Krausen would work fine. I just did it with my dopplebock as some insurance to ensure I reach EVG.
- The best do the basics better -
-
- Apprentice Brewer
- Posts: 149
- Joined: Tue Oct 13, 2015 8:40 pm
Re: SMB AT Kegging
I was always under the impression that it did not kill the yeast, but it removed the oxygen that they need & force them into dormancy.
But...I could be wrong.
But...I could be wrong.
-
- Assistant Brewer
- Posts: 331
- Joined: Thu Oct 15, 2015 5:25 pm
- Location: Western WIS
Re: SMB AT Kegging
I heard they use it the day before they pitch the yeast for wine to Degas and kill off any wild yeast? After a day it's safe for yeast. I don't know how high a dose it would take to do any damage?
-
- Assistant Brewer
- Posts: 331
- Joined: Thu Oct 15, 2015 5:25 pm
- Location: Western WIS
- mchrispen
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 2:15 pm
- Location: Austin, TX
- Contact:
Re: SMB AT Kegging
I use K-meta in mead and wine. Exactly as Kit says... the K-meta occludes oxygen, also has a direct effect on LAB in a low pH environment. Sorbates are used as well to prevent cell replication. The dosage is pretty small and should consider the must pH when stabilizing. My GoogleFu failed me or I would put a link.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
Re: SMB AT Kegging
It does't quite make sense to me how eliminating oxygen would kill organisms capable of fermentation. I think either the sulfur dioxide or sulfite are directly toxic to the cells. This suggests that yeast can build a tolerance to sulfur dioxide. Some also suggest to combine with citric acid to sanitize, as the sulfur dioxide is more effective with lower pH.
http://www.danstaryeast.com/articles/su ... wing-yeast
http://www.danstaryeast.com/articles/su ... wing-yeast
- The best do the basics better -
- mchrispen
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 2:15 pm
- Location: Austin, TX
- Contact:
Re: SMB AT Kegging
The low oxygen is preventing replication as O2 is exhausted much more quickly, stopping any budding, not killing. Toxicity from the sulfur dioxide, etc. requires fairly high doses. I personally do not like using it - even with fresh fruit, especially apples. Anything delicate will carry over some of the sulfur properties. I prefer to only use K-meta + sorbate to stabilize a wine/mead where I want it - and use the pH to calculate the minimum effective dosage. Stabilization doesn't kill, so much as functionally neuter yeast and LAB. The K-meta_sorbate dosage should account for previously added K-meta doses from earlier racking. That is usually near the LODO dosage rates (FYI). I have tried ascorbic acid and I do not like the residual flavors, but I could do more experimentation to see how effective it might be. I have switched recently to 0.45u filtering for a more sterile result, combined with bringing pH levels below 3.2 (again mead and wine).
Perhaps an additional small dosage might be anti-oxidant, but I wonder about the additional sulfur compounds that would remain. They certainly show in a delicate show mead, and I suspect in a helles maybe detectable. It's a different aroma than yeast driven sulfur, IMO.
I think there is a paper on this from UC Davis, I just cannot find it. I will ping Schramm and Moteulo to see if they can point me to the pertinent info.
Perhaps an additional small dosage might be anti-oxidant, but I wonder about the additional sulfur compounds that would remain. They certainly show in a delicate show mead, and I suspect in a helles maybe detectable. It's a different aroma than yeast driven sulfur, IMO.
I think there is a paper on this from UC Davis, I just cannot find it. I will ping Schramm and Moteulo to see if they can point me to the pertinent info.
- Owenbräu
- German Brewing
- Posts: 1196
- Joined: Tue Dec 22, 2015 8:23 pm
SMB AT Kegging
- Attachments
-
- Sulfite MOA.png (176.61 KiB) Viewed 8404 times
Last edited by Owenbräu on Sun May 08, 2016 7:49 am, edited 2 times in total.
- The best do the basics better -
- narcout
- Posts: 35
- Joined: Mon Apr 25, 2016 3:13 pm
- Location: Los Angeles
Who is online
Users browsing this forum: No registered users and 4 guests