Sulfite Strip Test
Moderator: Brandon
-
lupulus
- Apprentice Brewer
- Posts: 206
- Joined: Wed May 11, 2016 8:35 pm
Re: RE: Re: Sulfite Strip Test
Ich trinke Bier nur an Tagen die mit G enden , und Mittwochs
-
Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Sulfite Strip Test
Milling is a very big contributor to malt oxidation. In my books, it's the biggest contributor bar dissolved oxygen in mash liquor.
Sadly, a dispersion mills such as the Meura (I really like this company) Hydromill is a notch out of my budget.
Sadly, a dispersion mills such as the Meura (I really like this company) Hydromill is a notch out of my budget.
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
-
Bryan R
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
Re: Sulfite Strip Test
-German Brewing Founder-
-
caedus
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Sulfite Strip Test
Why not mill directly into the mash tun? That's my next mini project is making a temp lid for the mill to rest on while I crush into the mash tun, while it has CO2 flowing up from under the false bottom.
-
Bryan R
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
Re: Sulfite Strip Test
-German Brewing Founder-
-
caedus
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
-
Bryan R
- Braumeister
- Posts: 882
- Joined: Tue Oct 13, 2015 9:27 pm
-
Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Sulfite Strip Test
Even when set up with a motor it's possible to mill straight into the tun. I did that for years until recently. It will revert pretty soon .
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
-
caedus
- Apprentice Brewer
- Posts: 167
- Joined: Mon Apr 25, 2016 3:27 pm
Re: Sulfite Strip Test
Did you set it up with an auger? I have been playing with the idea to do some sort of DIY chain augur for years now.
-
Weizenberg
- German Brewing
- Posts: 843
- Joined: Wed Nov 11, 2015 2:11 pm
- Contact:
Re: Sulfite Strip Test
Hmmm, why do you think that's needed?
One can do all sorts of DIY projects. In my case, a wooden board with the mill over the mash tun filled with water is sufficient.
I do have the agitator running gently. This prevents clumps.
One can do all sorts of DIY projects. In my case, a wooden board with the mill over the mash tun filled with water is sufficient.
I do have the agitator running gently. This prevents clumps.
The Quest for Edelstoff - http://edelstoffquest.wordpress.com
Who is online
Users browsing this forum: No registered users and 3 guests